Pearl 6MWCP-100D363V - 6 Inch Submersible Motor - 3-Phase - 10 HP - 460V - 3 Wire

$1,874.24
In stock
SKU
6MWCP-100D363V
Pearl 6MWCP-100D363V - 6 Inch Submersible Motor - 3-Phase - 10 HP - 460V - 3 Wire is available to buy in increments of 1
• Manufacturer: Pearl • Series: 6MWP • Model: 6MWCP-100 • Motor Size: 6-Inch • Horsepower Rated: 10 HP • Voltage: 460 Volts • Motor Type: 3-Wire ( L1 / L2 / N / Ground ) • Motor Phase: 3-Phase • AMPS: 45.2 (line) / 46.7 (main) / 10.9 (aux) • Service Factor: 1.15 SF • Service Factor AMPS: 52.0 (line) / 46.7 (main) / 10.9 (aux) • KW Rating: 7.5 Kw
PEARL - 6" SUBMERSIBLE MOTORS - 6MWCP - Submersible Motors Water cooled motors with encapsulated resin filled stator. Coupling dimensions and flange according to NEMA standard. Standard Features of Pearl 6MWCP Series 6" Submersible Pump Motors • High efficiency provides operation cost savings • Motor casing and shaft made of AISI304L stainless steel (Optional AISI316L) • High resistance coated cast iron upper and lower bracket (Optional AISI304L / AISI316L) • Water lubricated Kingsbury type thrust bearings • Protection IP68 • Sand slinger protection • Pressure equalizing diaphragm • Insulation class F • Removable lead cable • Starting method D.O.L. and star/delta Operating Limits of Submersible Motors • Maximum voltage fluctuation: ±10% • Maximum water temperature: 95°F ( Requires Minimum of 0.55 ft/second of water flow speed ) • Maximum motor starting per hour: 20 Hours • Maximum immersion depth: 1148 Feet • Horizontal operation: YES ( 5 HP - 30 HP Motors ) Use Of Colling Jackets • Cooling of submersible motors is provided with the flow of the water around it. That’s why water flow around motors has vital importance during submersible pump installation. This flow rate depends on diameter and power of motor. • Most important factor of submersible motors’ long service life is that the motor must have adequate flow for proper cooling. • If the motor will be installed in an open body of water (i.e pool) or diameter of the well is much bigger than the diameter of the motor, Flow Inducer Sleeve must be used to provide the flow velocities that are given in the table below, around the motor.
More Information
Motor Wires ( 2W or 3W ) 3W ( 3-Wires + Ground )
Submersible Motor Size 6" Submersible Motors
Submersible Motor Voltage 460 Volts
Submersible Motor Phase Three Phase Motor
Featured No
Submersible Motor HP Rated 10 HP
Brand Pearl
Featured Product No
Copyright © 2007 - 2022 Supreme Water Sales - The Clear Choice - All rights reserved.