Watts GTS550S-NAGF-MT Reverse Osmosis Systems - 5-Stage - Metal Tank - 50 GPD

In stock
Watts GTS550S-NAGF-MT Reverse Osmosis Systems - 5-Stage - Metal Tank - 50 GPD is available to buy in increments of 1

• Manufacturer: Watts Water
• System Type: Reverse Osmosis
• Series: GTS550S
• Number of Stages: 5-Stages
• Basic Faucet: Included
• RO Tank Type: Metal

FPMB5-978 - STAGE 1 (Sediment) 
MAXETW-975 - STAGE 2 (Pre-Carbon)
MAXETW-975 - STAGE 3 (Post-Carbon)
W-1812-50 - STAGE 4 (Membrane)
AICRO - STAGE 5 (1/4" GAC Inline)
Purchase extra set of filters by here: Reverse Osmosis Filter Kit - 5-Stage RO System - 50 GPD

What is a Reverse Osmosis Systems
Reverse Osmosis (RO) is a proven and dependable technology. RO systems work by forcing water through a semi-permeable membrane that separates the clean water at the molecular level from the majority of impurities. Impurities including sodium, calcium, chloride, sulfates, and heavy metals commonly measured as total dissolved solids (TDS) are typically reduced by 99% and rinsed down the drain. Watts RO systems use proven treatment methods including sediment, carbon, and membrane technology to produce highly-purified, great-tasting water.

Reverse Osmosis System Facts RO membranes are able to reject up to 99% of the dissolved solids in your water. Dissolved solids includes metals, salts, and minerals. RO is also able to reject up to 99.9% of cysts, bacteria, and viruses.

Watts GTS450S / GTS550S Standard Reverse Osmosis Systems - Features & Benefits
• Uses industry standard cartridges
• Proven designs and models
• High flow faucet plumbing (3/8" post filter and 3/8" tubing to faucet)
• Inlet water supply fitting is adaptable to use with 3/8" compression or 1/2" compression fittings
• Installation kit is included
• Quick-Connect fittings on inlet and outlet ports
• 50 GPD or greater thin film membrane
• Clog free brine flow control

Feed Water Specifications
• Maximum Total Dissolved Solids: (TDS) 1,800 ppm
• Iron ( Maximum ): 0.2 ppm
• Hardness (less than): 10 gpg
• Hydrogen Sulfide: 0.0 ppm
• Manganese (less than) :0.05 ppm
• Turbidity (less than): 1 NTU
• pH Level / Range: 3-11
• Minimum Pressure: 40 psi (2.8 bar) -- ( Recommend Booster Pump if incoming pressure is below 40 psi )
• Maximum Pressure: 100 psi (7 bar)

More Information
Featured No
Brand Watts Water
Featured Product No
Copyright © 2007 - 2022 Supreme Water Sales - The Clear Choice - All rights reserved.