Pearl IRON JET - IRONJ-10F16P - Cast Iron Shallow Well Jet Pump - 1 HP
Pearl IronJet IRONJ10 - Shallow Well Jet Pump - 1.0 HP
The Pearl IRON JET is a self priming jet pump, after the first priming the pump, and will never need to prime again as long as no air enters the system. The pump design and features guarantees complete customer satisfaction, such as: All components were carefully manufactured to assure the best performance and reliability.
• IRON JET’s construction is suitable for outdoor applications
• IRON JET comes equipped with PEARL pressure switch for quick installation
APPLICATIONS / Use for Jet Pump
• Supplying domestic water supply
• Pull water out of a well or tank, at a desirable pressure ( STD 30/50 )
• Lifting water containing air or other gases
• Boost pressure from flooded suction applications
• For garden use, or light gardening, where "on-demand" water is required for hand-watering
OPERATING CONDITIONS - Pearl IronJet pumps
• Liquid temperature: 32 °F to 150 °F
• Maximum working pressure: 125 PSI
• Made for continuous duty
MATERIAL OF CONSTRUCTION - Standard
• Closed coupled self-priming centrifugal pump
• High quality components for domestic water supply and irrigation in respect to low lead requirements
• Connections threaded ports NPT
• All hardware in Stainless Steel
• Pre-drilled priming port with plug
• Pre-drilled drain port with plug for maintenance
• U shape base on all models gives a complete full support to the pump
STANDARD BUILD
• PUMP CASING - Cast Iron
• IMPELLER - PPE + PS, including SS304 inserts
• DIFFUSSER - PP, Volute with ss304 wear ring
• SHAFT - 304 SS + 40Cr
• MECHANICAL SEAL - SIC/SUS316/EPDM
PEARL IRONJET - MOTORS ( Standard Specifications )
• NEMA Standard
• ODP 56J motors ( wide body ) for much cooler surface temperature
• Thermal overload protection
• Capacitor start, capacitor run type motor ( For 1/2 HP to 3/4 HP Models )
• Permanent Split Capacitor (PSC) without centrifugal switch ( For 1 to 1-1/2 HP Models )
• Front bearing 6204 for much longer life span
• All copper winding
• Class F Dupont Nomex Insulation System, cCSAus approved
• Single phase ½ - ¾ - 1 - 1½ Hp, 115/230 V
• Easy voltage conversion ( From rear motor cover )
• Maximum ambient temperature admitted: 40 °C (104 °F)
• Assembled With PEARL Pressure switch ( 30/50 psi )
Multi-Stage Pump | No |
---|---|
Horsepower Rated | 1 hp |
Pump Type | Jet Pumps |
Voltage | 115 / 230 Volts |
Brand | Pearl |
Featured Product | No |