VIQUA UVMax Model H Ultraviolet UV Disinfection System - 45 gpm

In stock
VIQUA_UVMax_model-H (650651)
VIQUA UVMax Model H Ultraviolet UV Disinfection System - 45 gpm is available to buy in increments of 1

• Rated for 45 GPM
• Rated UV life: 2 Years
• Voltage: 115/230v 
• Audio/Visual Lamp Failure Alarm 
• UV Sensor: No
• Port size: 1.5" MNPT / Outlet: 1" FNPT
• Lamp replacement reminder 
• Length 31" x 4"
• Maximum pressure 125 PSI
• Working temp: 35ºF - 104ºF
• Effectively Destroys 99.9% of Waterborne Microorganisms.
• Comparable to the SmartStream WD050 UV System - Series D

VIQUA UVMax Model H - Ultraviolet UV Disinfection System - 45 gpm

The Viqua UVMax Model H UV sterilizer is a commercial UV sterilizer designed for flow rates up to 45 GPM at 30mJ/cm² (37 GPM at 40mJ/cm²) . It is designed to treat bacteria (such as e.coli and coliform), viruses, and other microbiological contaminants including giardia (beaver fever) and cryptosporidium without the use of chemicals. It is suitable for the treatment of private wells and surface water supplies, as well as municipal water for those seeking a higher level of confidence in the safety of their water supply.

The Viqua Model H controller includes a unique and intuitive display with LED status lights that correspond to each component of the system. At a quick glace, the operator can identify the status of each component - green means all is good, orange means maintenance is required, and red means there is a fault. The controller automatically senses line voltage between 100 and 240 volts for consistent UV output and performance in varying electrical operating conditions.

The Model H uses Viqua's industry-leading amalgam lamp technology which offers up to double the lamp life of competitors' systems - 2 years! That means less maintenance and lower lamp costs over the life of the system. The amalgam lamps are also more stable thereby producing more consistent output at varying temperatures and over the life of the lamp.

The CoolTouch fan system and built-in convection air flow provide important cooling during periods of inactive water use. Competitors' UV systems can often over-heat the water considerably as the water absorbs heat from the UV lamp. By maintaining cooler temperatures, scale formation on the UV sleeve is reduced thereby reducing maintenance requirements, and the UV dose is more stable.

Key to the long-standing popularity of the UVMax product line its brand reputation, feature-rich controller, and no-tools maintenance. The ultra high output lamp results in a system with a very compact size relative to its treatment capacity, and its constant current power supply ensures a uniform UV dose even when the source power supply fluctuates.

UV disinfection is safe, effective, economical, and best of all, does not add undesirable chemicals to your water like chlorine or chloramine.


More Information
UV Power Wattage 125 to 175 Watts
UV Flow Rate 30 to 50 GPM
UV Pipe Connection Inlet: 1.25" MNPT - Outlet: 1" MNPT
GPM Rated 37-45
Flow Rate @ 30mJ/cm2 45
Featured No
Brand Viqua
Featured Product No
Copyright © 2007 - 2022 Supreme Water Sales - The Clear Choice - All rights reserved.