Franklin Electric 5870205403C SubDrive30 Connect Submersible Motor Constant Pressure Controller NEMA3

In stock
Franklin Electric 5870205403C SubDrive30 Connect Submersible Motor Constant Pressure Controller NEMA3 is available to buy in increments of 1
• Manufacture: Franklin Electric • Series: SubDrive Connect • MPN: 5870205403C • Product Type: Variable Frequency Drive ( Constant Pressure ) • Enclosure Type: NEMA 3R

Franklin Electric SubDrive Connect Description

Franklin Electric's selection of SubDrive30 controllers use state-of-the-art technology to provide constant water pressure through variable speed control of submersible water well pumps including connectivity for advanced monitoring, setup and troubleshooting through FE Connect Mobile App. Designed for three-phase motors, SubDrive Connect offers an array of NEMA 3R (Type 3) enclosure drives to solve constant pressure challenges with three-phase performance using single-phase input power.

Franklin Electric SubDrive Connect Applications

  • Residential Homes
  • Restaurants
  • Farms
  • Schools
  • Car Washes
  • Landscape Irrigation Systems

Franklin Electric SubDrive Connect Features

  • Single-Phase Input, 3-Wire and 3-Phase Motor Control
  • Easy, Plug-and-Play Installation
  • 1HP - 3HP Performance in an Array of Submersible and Above Ground Pumping Systems
  • Smooth Running
  • High Starting Torque
  • NEMA 3R Enclosure (indoor/outdoor) that Provides a Degree of Protection Against Falling Rain or Sleet
  • Constant Water Pressure with a Wide Range of Settings
  • FE Connect Smartphone App for Advanced Settings and Monitoring
  • User-Configurable Motor Frequency Range
  • Soft-Start Feature Prevents Water Hammer and Increases Motor Life
  • Works with Small Pressure Tanks or Existing Larger Tanks
  • Advanced Filtering to Remove Radio Frequency Interference
  • Builto-In Diagnostics and Protection (surge protection, short circuit, underload, overheated controller, undervoltage, broken pipe detection, locked pump, user-configurable underload off time, open circuit)
  • Easily Replaceable Fan Kit
  • Ul and cUL Listed

Benefits of Using a SubDrive Utility
• Constant Water Pressure: The Franklin Electric SubDrive Utility provides consistent pressure regulation using advanced electronics to drive a standard motor and pump according to the pressure demands indicated by a highly accurate, heavy-duty, long-life pressure sensor or analog pressure transducer. By adjusting the motor/pump speed, the SubDrive Utility can deliver constant pressure dependably, even as water demand changes. For example, a small demand on the system, such as a bathroom faucet, results in the motor/pump running at a relatively low speed. As greater demands are placed on the system, such as opening additional faucets or using appliances, the speed increases accordingly to maintain the desired system pressure. Using the provided SubDrive pressure sensor, system pressure can be set in the range of 25–80 psi (1.7–5.5 bar).
• Reduced Tank Size: Conventional systems use larger tanks in order to store water, whereas SubDrive Utility systems may utilize a smaller tank in order to maintain constant pressure.
• Over Temperature Foldback: SubDrive Utility controllers are designed for full power operation in ambient temperatures up to 122 °F (50 °C) at nominal input voltage. In extreme thermal conditions, the controller will reduce output power in an attempt to avoid shutdown and potential damage while still trying to provide water. Full output power is restored when the internal controller temperature cools to a safe level.
• Motor Soft Start: Normally, when there is a demand for water, the SubDrive Utility will be operating to accurately maintain system pressure. Whenever the SubDrive Utility detects that water is being used, the controller always “ramps up” the motor speed while gradually increasing voltage, resulting in a cooler motor and lower start-up current compared to conventional water systems. In those cases where the demand for water is small, the system may cycle on and off at low speed. Due to the controller’s soft-start feature and the sensor’s robust design, this will not harm the motor or the pressure sensor.Adjustable
• Under-load Sensitivity: The SubDrive Utility controller is configured at the factory to ensure detection of under-load faults in a wide variety of pumping applications. In rare cases (as with certain pumps in shallow wells), this trip level may result in nuisance faults. If the pump is installed in a shallow well, activate the controller and observe system behavior. Once the controller begins to regulate pressure, check operation at several flow rates to make sure the default sensitivity does not induce nuisance under-load trips.
HOW IT WORKS The Franklin Electric SubDrive Utility is designed to be part of a system that consists of only four (4) components: A. Standard Pump and Franklin Electric Motor B. SubDrive Utility Controller C. Pressure Tank D. Franklin Electric Pressure Sensor SubDrive Utility UT2W Submersible Pump Installation Example

More Information
Control Box Type Variable Frequency Drive ( VFD )
Control Box Voltage 115 / 230 Volts
Featured No
Submersible Motor Size 4" Submersible Motors
Brand Franklin Electric
Featured Product No
Copyright © 2007 - 2022 Supreme Water Sales - The Clear Choice - All rights reserved.