Pearl 6MWCP-75C363V - 6 Inch Submersible Motor - 7-1/2 HP - 230V - 3-phase
$1,653.74
In stock
SKU
6MWCP-75C363V
Pearl 6MWCP-75C363V - 6 Inch Submersible Motor - 7-1/2 HP - 230V - 3-phase is available to buy in increments of 1
• Manufacturer: Pearl
• Series: 6MWP
• Model: 6MWCP-75
• Motor Size: 6-Inch
• Horsepower Rated: 7-1/2 HP
• Voltage: 230 Volts
• Motor Type: 3-Wire ( L1 / L2 / N / Ground )
• Motor Phase: Single Phase
• AMPS: 36.8 (line) / 34.5 (main) / 5.5 (aux)
• Service Factor: 1.15 SF
• Service Factor AMPS: 42.3 (line) / 39.8 (main) / 6.3 (aux)
• KW Rating: 5.5 Kw
PEARL - 6" SUBMERSIBLE MOTORS - 6MWCP - Submersible Motors
Water cooled motors with encapsulated resin filled stator. Coupling dimensions and flange according to NEMA standard.
Standard Features of Pearl 6MWCP Series 6" Submersible Pump Motors
• High efficiency provides operation cost savings
• Motor casing and shaft made of AISI304L stainless steel (Optional AISI316L)
• High resistance coated cast iron upper and lower bracket (Optional AISI304L / AISI316L)
• Water lubricated Kingsbury type thrust bearings
• Protection IP68
• Sand slinger protection
• Pressure equalizing diaphragm
• Insulation class F
• Removable lead cable
• Starting method D.O.L. and star/delta
Operating Limits of Submersible Motors
• Maximum voltage fluctuation: ±10%
• Maximum water temperature: 95°F ( Requires Minimum of 0.55 ft/second of water flow speed )
• Maximum motor starting per hour: 20 Hours
• Maximum immersion depth: 1148 Feet
• Horizontal operation: YES ( 5 HP - 30 HP Motors )
Use Of Colling Jackets
• Cooling of submersible motors is provided with the flow of the water around it. That’s why water flow around motors has vital importance during submersible pump installation. This flow rate depends on diameter and power of motor.
• Most important factor of submersible motors’ long service life is that the motor must have adequate flow for proper cooling.
• If the motor will be installed in an open body of water (i.e pool) or diameter of the well is much bigger than the diameter of the motor, Flow Inducer Sleeve must be used to provide the flow velocities that are given in the table below, around the motor.
Motor Wires ( 2W or 3W ) | 3W ( 3-Wires + Ground ) |
---|---|
Submersible Motor Size | 6" Submersible Motors |
Submersible Motor Voltage | 230 Volts |
Submersible Motor Phase | Three Phase Motor |
Featured | No |
Submersible Motor HP Rated | 7-1/2 HP |
Brand | Pearl |
Featured Product | No |
Related Products
Check items to add to the cart or
We found other products you might like!
View More Pearl Products