Franklin Electric 20JV1P4-2W230 Submersible Pump - 20 GPM - 1 HP - 230 Volts ( 2 Wires + Ground )

$1,916.59
In stock
SKU
95202020
Franklin Electric 20JV1P4-2W230 Submersible Pump - 20 GPM - 1 HP - 230 Volts ( 2 Wires + Ground ) is available to buy in increments of 1
• Manufacturer: Franklin Electric • Brand: J-Class • Model: Series V • Product Type: 4" Submersible Pump - Complete Pump & Motor • Model Number: 20JV1P4-2W230 • Order Number: 95202020 • Motor Horsepower: 1 HP • Motor Voltage: 230 Volts • Motor Phase / Hz: Single Phase / 60 Hz • Motor Wire Type: 2-Wire Motor • Motor Lead: 3-Wires ( L1 / L2 / Ground ) • Pump GPM Rated: 20 GPM • Pump Stages: 7 Stages • Pump TDH Rated: 175 TDH • Pump Discharge Connection: 1-1/4" NPT • Pump Discharge Head & Wire Bracket: Thermoplastic • Maximum Diameter: 3.90" ( Including Wire Cable Guard ) • Total Length: 27.96" • Total Weight: 31 Lbs
Franklin Electric 4" Submersible Pump J-Class Series V 20JV1P4-2W230 Product Specifications • Product Type: 4" Submersible Pump - Complete Pump & Motor • Manufacturer: Franklin Electric • Brand: J-Class • Model: Series V • Model Number: 20JV1P4-2W230 Franklin Electric Motor Specifications • Motor Horsepower: 1 HP • Motor Model: 2445089003GS • Motor Voltage: 230 Volts • Motor Phase / Hz: Single Phase / 60 Hz • Motor Wire Type: 2-Wire Motor • Motor Lead: 2-Wires ( L1 / L2 / Ground )* * Please Note: Motor will not require a Control Box to operate and run Franklin Electric Pump-End Specifications • Pump GPM Rated: 20 GPM • Pump Stages: 7 Stages • Pump TDH Rated: 175 TDH* * Please Note: TDH (Total Dynamic Head) is calculated based on: Operated Pressure + Depth to Water in Well + Pipe Friction + Elevation Changes ) • Pump Discharge Connection: 1-1/4" NPT • Pump Discharge Head & Wire Bracket: Thermoplastic Franklin Electric Submersible Pump Dimensions • Maximum Diameter: 3.90" ( Including Wire Cable Guard ) • Total Length: 27.96" • Total Weight: 31 Lbs Standard Features of Series V Submersible Pumps • The Franklin Electric J-Class Series V is a complete 4" submersible pump that features unique hydraulics that improve efficiency and minimize wear even when pumping abrasives • Discharge head and motor bracket produced with industry proven, engineered materials. • Large wrench flat area on the discharge head for ease of installation • Dry run designed top bearing positively supports the 300 series stainless steel 7/16" hex shaft • Removable internal check valve • Powered by Franklin Electric corrosion resistant super stainless 4" submersible motors with lightning protection • Maximum water temperature with proper flow is 120 °F
More Information
Total Dynamic Head (TDH) 150 to 175 (TDH)
Motor Wires ( 2W or 3W ) 2W ( 2-Wires + Ground )
Impeller Type Standard Impellers
Pump Diameter 4-Inch
Horsepower Rated 1 hp
GPM Range 16 to 20 gpm
Voltage 230 Volt
Brand Franklin Electric
Featured Product No
Copyright © 2007 - 2022 Supreme Water Sales - The Clear Choice - All rights reserved.