Watts Big Bubba BBH-150 Non-Metallic Filter Housings

The Watts BBH150 Big Bubba® Non-Metallic Filter Housings for High Flow applications. Big Bubba Filter housings are made of rugged, glass-reinforced polypropylene so they will not chip, rust or dent. And because all wet surfaces are non-metallic, they are ideal when chemical compatibility is an issue and for sea water applications also.

Watts BBH-150 Big Bubba Filters Typical Applications
• Whole house filtration
• Commercial filtration
• Industrial filtration
• Pre-filtration for reverse osmosis equipment
• Community water systems
• Sea water applications - due to their noncorrosive construction
• Replacement for bag filters more filter area
• Replacement for multiple cartridge filters for greater convenience
• Water for livestock and poultry

Why you should consider using a Big Bubba for your Water Filtration Systems?
• Rugged Construction: Filter housings are made of rugged, glass-reinforced polypropylene so they will not chip, rust or dent. And since all wet surfaces are non-metallic, they are ideal where chemical compatibility is an issue and for sea water applications
• Low Cost: Filters are an economical replacement for stainless steel filtration equipment because of their non-metallic construction and today’s high cost of stainless steel
• Conserves Water: Watts whole house filters with our proprietary pleated activated carbon cartridge conserves water because back washing is not required, making them 100% efficient
• Low Pressure Drop: Big Bubba® Cartridge Filters housings are designed to minimize pressure drop, by using 2” pipe fittings and large diameter center tubes

Installation Options
• Parallel installations - recommended to achieve high flow rates, by installing filters on a common manifold, feeding all filters installed in a row
• Series installations - recommended for applications such as surface water filtration, where cartridges having different micron ratings are used

Materials of Construction
• Body (all wet surfaces): Glass reinforced PP
• Cartridge end caps: Glass reinforced PP
• Swing bolts: 304 stainless steel
• O-rings (cartridges): EPDM
• O-ring (lid): EPDM

Size and Connections
• Inlet/Outlet Connections: Pipe fittings 2" slip
• Overall height: 40"
• Width (vessel OD): 12"

Changing Out Big Bubba Filters is as E-Z As 1, 2, 3
1. Remove swing bolts
2. Remove lid
3. Rotate cartridge 1/4 turn and pull-up

From The Manufacturer Watts Water Technology The Watts Big Bubba systems are 100% proprietary. We DO NOT support, nor recommend, the use of generic NEO-PURE products in our filtration systems. NEO-PURE generic products WILL NOT meet our High Quality Build Standards WE REQUIRE for use in Watts Water Quality Products.