Hydrosafe 3-in-1 Complete Water Filtration System - UV Disinfection - 0.2 Micron Filtration - HSFS

Hydrosafe HSFS is a complete 3-in-1 Water Filtration with UV Disinfection Systems combines three technologies with one solution that will provided superior filtration and water purification How Does the HydroSafe HSFS work as a 3-in-1 System? 1) UV Disinfection - Destroys Bacteria viruses and other harmful microorganisms 2) Pleated Cartridges - Removes Sediment, such as particulate, sand, silt, rust and other solids 3) Activated Carbon - Removes chlorine, taste and odors. UV light destroys bacteria, viruses and other harmful microorganisms without the use of chemicals. HydroSafe HSFS Features • Unique Big-Bubba Style Housing is the filter vessel, which is made from rugged, glass-reinforced polypropylene to resist chipping, rusts and dents. • 254-nanometer UV lamp • 0.2 micron filter media • Stainless steel reactor chamber Specifications (Model HydroSafe HSFS) • Maximum Flow Rate - 14 GPM • Voltage (UV Lamp) - 110 Volts • Cartridge capacity (Gals./ Average Use) - 120,000 Gallons • UV Dose Rate (mJ/cm2) - 40,000 + • Bacteria Reduction* - 99.9% ( *E-Coli used for tests with cartridge in place ) IMPORTANT PRODUCT NOTE: It is essential to install a one micron pre-filter prior to the unit to extend the life of the 0.2 micron cartridge HydroSafe's - Triple-Treat™ Protection The innovative HydroSafe® filtration system incorporates three technologies in one unit to provide three-step treatment to remove: ✓ Bacteria ✓ Cysts ✓ Chlorine ✓ Tastes ✓ Odors ✓ Sediment ✓ More HydroSafe's Three-In-One Technology Provides peace of mind and safe, great tasting water, supplied to every tap in the house. Here’s how the system works: Step #1 0.2 Micron Filtration Hydro-Safe filter cartridge is pleated for greater surface area using a micro-fiber, rated at 0.2 micron. This unique filter media is certified under NSF / ANSI Standard 53 for cysts reduction with the capacity to remove sub-micron particles and harmful microorganisms with very little pressure drop or flow restriction. Step #2 - Carbon Treatment An exceptionally fine activated carbon powder is added to the sub micron filter fiber using an electrostatic bonding process. Activated carbon provides a secondary treatment process to remove chlorine, taste and odors. Step #3 - UV Light Disinfection During the final process, water flows into a stainless steel reaction chamber where it is exposed to a 254 nanometer UV lamp. Inside this chamber bacteria, viruses and other harmful microorganisms are destroyed to provide disinfection without the use of chemicals. Replacement Parts • Filter Cartridge: HSFSCART-PAC • UV Lamp: HSFSLAMP • UV Quatrz Sleeve: HSFSQUARTZ • UV Ballast: WUVBALLAST6-12