Pearl JCCQ-15C16P - Jet Pump - Brass Impeller - 1-1/2 HP - 230 Volt
$876.49
In stock
SKU
JCCQ-15C16P
Pearl JCCQ-15C16P - Jet Pump - Brass Impeller - 1-1/2 HP - 230 Volt is available to buy in increments of 1
• Manufacturer: Pearl
• Series: JCCQ Series
• Product Type: Shallow Well Jet Pump
• MPN: JCCQ-15C16P
• Horsepower: 1-1/2 HP
• Voltage: 230 V
• Operating Range: 20 to 50 psi
• Inlet / Outlet Pipe Connections: 1-1/2" NPT / 1" NPT
• Impeller: Brass Impeller
Pearl JCCQ - Standard Shallow Well Jet Pump - Brass Impeller - 1.5 HP - 230 Volt
Difference Between Pump Series
• JCCH - High Head - Standard Flow
• JCCQ - Standard 30 to 50 psi - High Flow
Product Highlights & Standard Features
• An exclusive diffuser design with flow control device provides for compact construction, fast self-priming capability and low noise.
• Reliable with new design features, the JCCH/JCCQ is more robust and forgiving when temporary abnormal operating conditions may exist.
• The JCCH/JCCQ is smaller than conventional pumps of a similar type, allowing for installation in restricted spaces and providing for easier retrofit applications.
Fast air evacuation reduces the risk of air-pockets developing at the mechanical seal preventing the danger of seal failure due to a lack of flushing and cooling.
• The JCCH/JCCQ is capable of lifting water from depths of 22 ft in less than 3 minutes, offers new possibilities on suction lift applications, and provides better trouble free service on normal shallow-well suction lift duties, also with a long suction pipe above the water level.
• The new diffuser and flow control device guide the fluid from the impeller into the central part of the pump casing, reducing turbulence and velocity, with effective use of the surrounding liquid in dampening the noise of flow.
Performance Ratings ( Optimum Ranges )
Recommend to use with less than 22 ft suction lift
• 5 Ft Lift @ 20 PSI : 50.2 GPM
• 5 Ft Lift @ 30 PSI : 38.3 GPM
• 5 Ft Lift @ 40 PSI : 26.5 GPM
• 5 Ft Lift @ 50 PSI : 14.8 GPM
*Max Shut-Off Pressure: 64 psi
• 10 Ft Lift @ 20 PSI : 48.7 GPM
• 10 Ft Lift @ 30 PSI : 36.8 GPM
• 10 Ft Lift @ 40 PSI : 25.0 GPM
• 10 Ft Lift @ 50 PSI : 13.3 GPM
*Max Shut-Off Pressure: 62 psi
• 15 Ft Lift @ 20 PSI : 45.6 GPM
• 15 Ft Lift @ 30 PSI : 33.7 GPM
• 15 Ft Lift @ 40 PSI : 21.9 GPM
• 15 Ft Lift @ 50 PSI : 10.3 GPM
*Max Shut-Off Pressure: 60 psi
• 20 Ft Lift @ 20 PSI : 43.5 GPM
• 20 Ft Lift @ 30 PSI : 31.6 GPM
• 20 Ft Lift @ 40 PSI : 19.9 GPM
• 20 Ft Lift @ 50 PSI : 8.3 GPM
*Max Shut-Off Pressure: 57 psi
Material of Construction
• Pump Body: Cast iron GJL 200 EN 1561
• Casing Cover: Cr-Ni steel 1.4301 EN 10088 (AISI 304)
• Impeller: Brass P-Cu Zn 40 Pb 2 UNI 5705
• Wear Ring Impeller-Diffuser: Cr-Ni steel 1.4301 EN 10088 (AISI 304)
• Diffuser: PPO-GF20 (Noryl)
• Ejector: PPO-GF20 (Noryl)
• Shaft: Stainless Steel 1.4104 EN 10088 (AISI 430)
• Mechanical Seal: Carbon-ceramic-NBR
• Pressure Gauge: Dry pressure gauge in metal
Typical Application & Use
• For lifting water out of a well
• For lifting water containing air or other gases
• For increasing water pressure from flooded suction applications
• A pressure boosting pump for water systems with low pressure (follow local specifications if increasing network pressure)
• For garden use
• For washing with a jet of water
Operating Conditions
• Liquid temperature: 32 °F to 95 °F
• Ambient Temperature: Up to 104 °F
• Maximum Suction lift 22 ft (MAX)
• Maximum permissible pressure in the pump casing: 140 psi
• Continuous Duty Rated
Motor Specifications
• 2-pole induction motor, 60 Hz (n ˜ 3450 rpm)
• Single-phase 230 V
• Capacitor inside the terminal box
• Insulation class F
• Protection IP 44
Assembled & Includes
• Pressure switch
• Pressure Gauge: Dry pressure gauge in metal
Multi-Stage Pump | No |
---|---|
Horsepower Rated | 1 1/2 hp |
Pump Type | Jet Pumps |
Voltage | 230 Volt |
Brand | Pearl |
Featured Product | No |