Pearl JSC-07F16P - Stainless Steel - Jet Pump - Brass Impeller - 3/4 HP - 115 / 230 Volt
$543.21
In stock
SKU
JSC-07F16P
Pearl JSC-07F16P - Stainless Steel - Jet Pump - Brass Impeller - 3/4 HP - 115 / 230 Volt is available to buy in increments of 1
• Manufacturer: Pearl
• Series: JSC Series - Stainless Steel
• Product Type: Shallow Well Jet Pump
• MPN: JSC-07F16P
• Horsepower: 3/4 HP
• Voltage: 115 / 230 V
• Amps: 10.5 / 5.4 amps
• Optimum PSI Range: 20 to 40 psi
• Inlet / Outlet Pipe Connections: 1" NPT / 1" NPT
• Impeller: Brass Impeller
• Pump Body: 304 Stainless Steel
PEARL JSC SERIES - STAINLESS STEEL SHALLOW WELL SELF PRIMING JET PUMP - 3/4 HP - 115 / 230 Volt
Standard Features and Highlights
• An exclusive diffuser design with flow control device provides for compact construction, fast self-priming capability and low noise
• Reliable with new design features the JSC is more robust and forgiving when temporary abnormal operating conditions may exist
• The JSC is smaller than conventional pumps of a similar type, allowing for installation in restricted spaces and providing for easier retrofit applications
• Fast air evacuation reduces the risk of air-pockets developing at the mechanical seal preventing the danger of seal failure due to a lack of flushing and cooling
• The new diffuser and flow control device guide the fluid from the impeller into the central part of the pump casing, reducing turbulence and velocity, with effective use of the surrounding liquid in dampening the noise of flow
• Pump body made of stainless steel 304
• Impeller: Low lead brass
• Includes: Dry pressure gauge in metal
Typical Application & Use
• For drawing water out of a well
• For lifting water containing air or other gases
• For increasing water pressure from flooded suction applications
• As pressure boosting pump for central water systems with low pressure (follow local specifications if increasing network pressure)
• For garden use
• For clean liquids or slightly dirty surface water
• For washing with a jet of water
Performance Ratings ( Optimum Ranges )
Recommend to use with less than 22 ft suction lift
• 5 Ft Lift @ 20 PSI : 21.3 GPM
• 5 Ft Lift @ 30 PSI : 14.7 GPM
• 5 Ft Lift @ 40 PSI : 8.7 GPM
• 5 Ft Lift @ 50 PSI : 3.3 GPM
*Max Shut-Off Pressure: 58 psi
• 10 Ft Lift @ 20 PSI : 20.4 GPM
• 10 Ft Lift @ 30 PSI : 13.9 GPM
• 10 Ft Lift @ 40 PSI : 8.0 GPM
• 10 Ft Lift @ 50 PSI : 2.7 GPM
*Max Shut-Off Pressure: 56 psi
• 15 Ft Lift @ 20 PSI : 18.7 GPM
• 15 Ft Lift @ 30 PSI : 12.3 GPM
• 15 Ft Lift @ 40 PSI : 6.6 GPM
• 15 Ft Lift @ 50 PSI : 1.4 GPM
*Max Shut-Off Pressure: 54 psi
• 20 Ft Lift @ 20 PSI : 17.5 GPM
• 20 Ft Lift @ 30 PSI : 11.3 GPM
• 20 Ft Lift @ 40 PSI : 5.6 GPM
• 20 Ft Lift @ 50 PSI : 0.6 GPM
*Max Shut-Off Pressure: 49 psi
Operating Conditions
• Liquid temperature: 32 °F to 95 °F
• Ambient temperature up to 104 °F
• Maximum permissible pressure in the pump casing: 116 psi
• Continuous duty
Motor Information
• 2-pole induction motor, 60 Hz (n ≈ 3450 rpm)
• Single-phase 115/230 V, 115 V, 230 V
• Capacitor inside the terminal box
• Insulation class F
• Protection IP 44
Material of Construction
• Pump Casing: Cr-Ni steel 1.4301 EN 10088 (AISI 304)
• Casing Cover: Cr-Ni steel 1.4301 EN 10088 (AISI 304)
• Impeller: Brass CW510L (lead free public LAW 111-380)
• Wear Ring Impeller-Diffuser: Cr-Ni steel 1.4301 EN 10088 (AISI 304)
• Diffuser: PPO-GF20 (Noryl)
• Ejector: PPO-GF20 (Noryl)
• Shaft: Chrome Steel 1.4104 EN 10088 (AISI 304), Cr-Ni steel 1.4305 EN 10088 (AISI 303) for JSC(H) 15
• Mechanical Seal: Carbon - Ceramic - NBR
Multi-Stage Pump | No |
---|---|
Horsepower Rated | 3/4 hp |
Pump Type | Jet Pumps |
Voltage | 115 / 230 Volts |
Brand | Pearl |
Featured Product | No |