Munro LP1502B - Centrifugal Irrigation Pump - 2.5 HP - High Head Pressure

$1,349.46 $1,349.46 Click for price What's this?
In stock
Munro LP1502B - Centrifugal Irrigation Pump - 2.5 HP - High Head Pressure is available to buy in increments of 1
• Manufacturer: Munro • Series: LP Series • MPN: LP1502B • Product Type: Self Priming Centrifugal • Impeller Material: Brass Impeller • Horsepower: 2.5 HP • Voltage: 208 / 230 Volt • Pipe Connections: 2" Suction (Inlet) / 1-1/2" Discharge (Outlet) • Suction Lift: 15 feet or less • Optimum Flow Rate: 40 to 75 gpm • Optimum TDH: 95 to 160 ft • Optimum PSI: 40 to 70 psi • Maximum Shut Off Pressure: 80 psi • Dimensions: 18" (L) x 9-1/2" (W) x 10-7/8" (H) • Weight: 120 lbs

About the Munro LP1502B LP Series Centrifugal Irrigation Pump
This very unique pump offers multi-stage performance with single-stage simplicity. The Munro LP 1502 self-priming centrifugal pump provides higher operating pressure like a multi-stage pump without the additional maintenance concerns multiple impellers present. Built for maximum durability and longevity.

Advantages & Benefits of the Munro LP1502B
Multi-stage performance with single-stage simplicity – This self-priming pump is truly unique and in a class by itself, delivering almost 60 gpm at 60 psi. The high-pressure capabilities of this pump can be compared to other brand’s multi-stage or 5hp pumps. Durable and long lasting – Before the LP1502B, only a multi-stage pump could achieve this performance to horsepower ratio. However, additional impellers require a longer shaft, which puts more load on the motor bearing and creates maintenance issues, including misalignment and wear. Keeping the shaft short makes the pump more stable and durable.

Add to this our cast iron construction and brass impeller and it’s clear that this is a pump made to stand the test of time, even in more unusual or difficult environments. Easy to install and maintain – Two priming ports make the Munro LP 1502 easy to install and two drain plugs make weatherization a snap.

A stainless steel wear ring reduces oxidation and friction, minimizing wear and repairs. If you should have to service the pump, stainless steel bolts and dry-socket design provide easy access.
• The Munro LP Series centrifugal irrigation pumps are designed specifically for your sprinkler irrigation system.
• This is a self-priming pump that will provides outstanding performance to horsepower ratio.
• Munro LP Series is heavy duty workhorse that offer high-end features that other competitors only offer as pricey add-ons.
• Irrigation Professionals trust the LP Series to deliver trouble-free performance.

Materials of Construction & Features Brass Impeller
• BRASS IMPELLER - Longest life and greatest durability. - Reduces costly maintenance vs plastic impellers.
• CAST IRON DIFFUSER - Assures durability for the life of the pump.
• CAST IRON CONSTRUCTION - Designed for long term performance. - No plastic case to warp or crack.
• STAINLESS STEEL WEAR RING - Reduces springtime oxidation and impeller friction.
• STAINLESS STEEL BOLTS - No more “busting knuckles” to remove bolts during maintenance.
• SILICA CARBINE SEAL - Proven toughness stands up to less than ideal conditions
• STEEL BASE PLATE - Easiest, most stable mounting, with four handy bolt holes.

Additional Features
• BUILT-IN PRIMING & DRAIN PORTS - Added start-up and maintenance convenience, no extra parts to buy.
• SENSOR PORT - Allows temperature monitoring to avoid costly maintenance issue.

Munro LP1502B - Operating & Performance Ratings Operation Guidelines
• Maximum Suction Lift: 15 feet
• Pipe Connections: 2" Suction (Inlet) / 1-1/2" Discharge (Outlet) • Voltage: 208/230 Volt

GPM Performance Rated
Capacity - U.S. Gallons per Minute Discharge Pressure (PSI) at 5' Suction Lift
• 40 psi - 75 gpm
• 50 psi - 67 gpm
• 60 psi - 56 gpm
• 70 psi - 38 gpm
• 80 psi - 0 gpm ( Maximum Shut Off Pressure for LP1502B )

Common Applications for the LP Series Pumps
• Residential Turf Irrigation: Drawing water from ponds, lakes, streams, cisterns and shallow wells
• Booster: Boost domestic water pressure for use in irrigation
• Water Transfer Systems

Top Advantages Over the Competitors 1)
Durable & Long Lasting
– While many centrifugal turf irrigation pumps are made out of plastic impellers, which wears down and warps, Munro LP Pumps are made with cast iron construction and a brass impeller. This means Munro self-priming pumps are built to stand the test of time, even in difficult environments. Testing in tough conditions shows Munro LP series pumps last up to four times as long as typical competitors products.

2) Industry Leading Performance – The proof is in the pump curves. In many cases a lower horsepower Munro LP pump will meet the same GPM performance that you’d expect to see only in higher horsepower pumps. With greater starting torque and an efficient run cycle, Munro pumps truly lead the pack.

3) Easy to install and maintain – With two priming ports and a durable steel base plate, installing a Munro LP Series is a snap. When it’s time to maintain or winterize the pump, you’ll love our two drain valves. A stainless steel wear ring reduces oxidation and friction, minimizing wear and repairs. If you do have to service the pump, stainless steel bolts and a dry-socket design provide easy access.

About Munro Company

Located in Grand Junction, Colorado - USA Munro engineers and manufactures their products to outperform, outlast, their competitors. Munro designs all products to used the highest quality parts & innovation that solve problems.
More Information
Multi-Stage Pump No
Pump Type Irrigation Pumps
Voltage 208 - 230 Volts
Brand Munro
Featured Product No
Copyright © 2007 - 2022 Supreme Water Sales - The Clear Choice - All rights reserved.