Shakti Submersible Pump Motor (Only) - 3HP - 3Wire - 3-Phase - 460V

$729.95
In stock
SKU
SM3HP3PH
Shakti Submersible Pump Motor (Only) - 3HP - 3Wire - 3-Phase - 460V is available to buy in increments of 1

• Manufacturer: Shakti Pumps
• Model: SM3HP3PH
• Product Type: 4" Submersible Pump Motor (Only)
• Motor Phase: 3-Phase
• Voltage: 460v
• Maximum Diameter: 3.90" 
• Total Length: 22"
• Total Weight: 60 Lbs

Shakti Submersible Pump Motor (ONLY) - 3HP - 3-Phase - 460V 

Product Specifications
• Product Type: 4" Submersible Pump motor Only  
• Manufacturer: Shakti Pumps 
• Model Number: SM3HP3PH

Shakti Motor Specifications 
• Motor Horsepower: 3 HP
• Motor Voltage: 460 Volts
• Motor Phase / Hz: Single Phase / 60 Hz
• Motor Wire Type: 3-Wire Motor
• Motor Lead: 4-Wires ( L1 / L2 / Neutral / Ground )*
* Please Note: Motor will require a Control Box to operate and run


Shakti Submersible Motor Dimensions
• Maximum Diameter: 3.90" ( Including Wire Cable Guard )
• Total Length: 22"
• Total Weight: 53 Lbs

Standard Features

Shakti submersible water pump is in high demand due to its innovative mechanical design and impeccable quality. It has carved a niche as the most predominant submersible pump and the company is one of the leading suppliers of submersible pumps in India. It is available in all size range starting from 100 mm. Shakti submersible pumps are manufactured from the superlative quality raw material using advanced fabrication technology, which ensure optimum performance and excellent quality.

Pump body is made with anti corrosive material with high wear resistance resulting in reduction in running costs and higher pumping efficiency and longevity. The pump can work continuously for a longer period of time without any trouble. Higher reliability and best results even under harsh conditions make it acceptable to its users.

 

A wide range Pump

We offer submersible pumps with energy- efficient duty points ranging from 1m3/h to 280 /h. The pump range consists of many pump sizes and each pump size is available with an optional number of stages to match any duty point.

High Pump Efficiency

Often pump efficiency is a neglected factor compared to the price variations and are without importance of pump and motor efficiencies

Example
When pumping 125 m3/h with a head of 200m for a period of 10 years $ 60,000 will be saved if pumps and motors having a 10% higher efficiency are chosen and the price is $ 0.10 per kW.

Applications

We offer a complete range of pumps and motors which as a standard are made completely of stainless steel AISI-304. This provides for good wear resistance and a reduced risk of corrosion when pumping ordinary cold water with a minor content of chloride.

The QF pumps are suitable for the following application :

• Raw water supply.
• Irrigation systems.
• Groundwater lowering.
• Pressure boosting.
• Industrial applications.

Low Installation Costs

Stainless steel means low weight facilitating the handling of pumps and resulting in low equipment costs and reduced installation and service time. In addition pumps will be as new after service due to the high wear resistance of stainless steel

Bearing with sand Channels

All bearings are water- lubricated and have a square shape, enabling sand particles, if any, to leave the pump together with the pumped liquid.

Inlet Strainer

The inlet strainer prevents particles over a certain size from entering the pump.

Non-return Valve

All pumps are equipped with a reliable non-return valve in the valve casing preventing back flow in connection with pump stoppage.

Furthermore , the short closing time of the non-return valve means that the risk of destructive water hammer is reduced to a minimum.

The valve casing is designed for optimum hydraulic properties to minimize the pressure loss across the valve and, thus, contributes to the high efficiency of the pump.

Priming Screw

All QF and QF 30 pumps are fitted with a priming screw. Consequently, dry running is prevented because the priming screw will make sure that pump bearing are always lubricated.

Due to the semi-axial impellers of large QF pumps (except for QF 30) this priming is automatically provided.

However, it applies to all pump types that if the water table is lowered to a level below the pump inlet neither pump nor motor will be protected against dry running.

Stop Ring

The stop ring prevents damage to the pump during transport and in case of up-thrust in connection with start-up.

The stop ring, which is designed as a thrust bearing limits axial movements of the pump shaft.

Example: QF 125

The stationary part of the stop ring (A) is secured in the top bowl (Upper intermediate chamber). The rotating part (B) is fitted above the collet [split cone(c)].

 

More Information
Motor Wires ( 2W or 3W ) 3W ( 3-Wires + Ground )
Submersible Motor Size 4" Submersible Motors
Submersible Motor Voltage 230 Volts
Submersible Motor Phase 3-Phase
Featured No
Submersible Motor HP Rated 3 HP
Brand Shakti Pumps
Featured Product Yes
Copyright © 2007 - 2022 Supreme Water Sales - The Clear Choice - All rights reserved.