Hydronix SDC-25-0510 - Melt Blown Filter Cartridges - 10 micron - 2-1/2 x 4-7/8 inch
• Manufacturer: Hydronix
• Brand: SDC Series
• Model: SDC-25-0510
• Filter Type: Polypropylene Melt Blown - Sediment Removal
• Filter Dimensions: 2-1/2" x 4-7/8"
• Micron Rating: 10 Micron
• NSF® Certified
• Replacement Option For: FPMB10-5 | MB-2505-10 | SD-25-0510 | SDF-25-0510
Sold by the Case Only (80 filter cartridges per case)
Hydronix SDC Series Sediment Depth Cartridges
• Graded density for higher dirt holding capacity
• Manufactured from 100% pure Polypropylene
• Made with FDA CFR 21 approved material
• NSF Standard 42 certified
HYDRONIX SDC SERIES 2.5” DIAMETER CARTRIDGES
The Hydronix Series 2.5” diameter SDC cartridge’s coreless design is an economical solution to pre-filtrationfor many applications. They are used widely as pre-filtration for RO systems and post-filtration for GAC filters. They are also used in applications such as ice machines, film processing, beverage, coffee,analytical, wineries, and many others. HYDRONIX SDC SERIES CARTRIDGES are made with 100% pure polypropylene and are free of surfactants, detergents and anti-static agents. SDC series fllter cartridges do not impart any substances into water which are known to or can cause adverse health effects to humans.
Specifications
• Material: Melt blown polypropylene
• Maximum temperature: 145° F
• Maximum pressure: 46.5 PSID
• Recommended change out: 31.75 PSID
• Maximum flow rate: 2-8 GPM (based on micron rating)
• Cartridge packaging Individually, shrink wrapped for purity
Micron Rating | 10 Micron |
---|---|
Filter Improves / Removes | Sediment / Particles |
Filter Type | Melt Blown / Polypropylene |
Approx Filter Size / Type | 2.1/2" x 5" |
Brand | Hydronix |
Featured Product | No |