Munro MXS203S11 - Multistage Bottom Suction Submersible Pumps - 1 hp - 110 v
In stock
SKU
MXS203S11
Munro MXS203S11 - Multistage Bottom Suction Submersible Pumps - 1 hp - 110 v is available to buy in increments of 1
• Manufacturer: Munro
• Brand: Munro
• Series: MX5
• Model Number: MXS203S11
• MPN: MXS203S11
• Horsepower: 1 HP
• Voltage: 115 Volts
• Amp Draw: 10.5 amps
• Motor Wires: 2-Wires ( + Ground Wire )
• Requires Control Box: No
• Phase / Hz: Single Phase / 60 Hz
• Cord Length: 14.5 Feet ( 16/3 Gauge )
• Discharge Pipe Connection: 1-1/4"
Performance Rated
• GPM Range: 15 - 20 GPM
• Optimum TDH Range: 90 to 120 FT - TDH
• Optimum PSI Range: 40 to 60 PSI
• Max Shut Off PSI: 69 PSI ( 160 FT - TDH )
• Pump Dimensions: 5" (W) x 17.50" (L)
Munro MXS 5" Multistage Bottom Suction Submersible Pumps - MXS203S11
Munro MX5 Bottom Suction Pumps are easy-to-install, high-head multistage submersible pump is designed for turf irrigation service, high head de-watering applications, and high pressure, low gallon water feature projects that require high head and low flow (i.e., fountains)
Standard Features & Highlights
• Stainless Steel Components ( Outside and Inside ) – non-corrosive, built to industrial specifications
• Self-Cooling & Quiet Operation – the pumped liquid cools the motor for long life
• Easy Installation – no control box required to start the pump
Typical Uses for the MXS Series Pumps
• Irrigation
• Shallow Wells
• Rain Collection Tanks
• Cisterns
• Grey Water
• Dewatering
• Fountains
• Pressure Boosting Domestic Water
Advantages of the MXS Series Submersible Pumps
• Non-corrosive – All hydraulic parts, including impellers and hydraulic bowl chambers, are made from high-grade stainless steel.
• Superior “Draw-Down” Capability – With the lowest draw down in its class, our 4 1/2” capability dwarfs the competition.
• Reduced Amp Draw – Offering over 25% less energy consumption reduces operating costs and extends the service life.
• Cooler and Quieter Operation – Using the pumped liquid to cool the motor, the water passing over the motor dampens the noise. No need for expensive “flow-inducer sleeves” required on other pumps.
Total Dynamic Head (TDH) | 75 to 100 (TDH), 100 to 125 (TDH) |
---|---|
Motor Wires ( 2W or 3W ) | 2W ( 2-Wires + Ground ) |
Impeller Type | Standard Impellers |
Pump Diameter | 5-Inch |
Horsepower Rated | 1 hp |
Voltage | 115 Volt |
Brand | Munro |
Featured Product | No |
Related Products
Check items to add to the cart or
We found other products you might like!
View More Munro Products