Watts WQT4RO11-50MT Quick-Twist (QT) Reverse Osmosis Systems - Metal Tank - 50 GPD
$380.87
Out of stock
SKU
WQT4RO11-50MT
• Manufacturer: Watts Water
• MPN: WQT4RO11-50MT
• System Type: Reverse Osmosis
• Series: Quick Twist (QT)
• Membrane Rated ( GPD ): 50 GPD
• Number of Stages: 4-Stages
• Includes Set of Filters: YES
• RO Tank Type: Metal
What is a Reverse Osmosis Systems
Reverse Osmosis (RO) is a proven and dependable technology. RO systems work by forcing water through a semi-permeable membrane that separates the clean water at the molecular level from the majority of impurities. Impurities including sodium, calcium, chloride, sulfates, and heavy metals commonly measured as total dissolved solids (TDS) are typically reduced by 99% and rinsed down the drain. Watts RO systems use proven treatment methods including sediment, carbon, and membrane technology to produce highly-purified, great-tasting water.
Reverse Osmosis System Facts
RO membranes are able to reject up to 99% of the dissolved solids in your water.
Dissolved solids includes metals, salts, and minerals.
RO is also able to reject up to 99.9% of cysts, bacteria, and viruses.
Watts Quick-Twist (QT) Series RO Cartridge Systems - Features & Benefits
• Watts Quick-Twist (QT) RO Systems utilize Quarter-Turn High Flow Encapsulated Cartridges
• Disposable encapsulated cartridges
• Automatic shut off when cartridges are removed
• Easy to remove/replace 1/4-turn filter cartridges
• No need to disconnect tubing when replacing membranes
• Proprietary filter cartridges
• High flow faucet plumbing (3/8" tubing from RO tank to faucet post filter and 3/8" tubing to faucet)
• Inlet water supply fitting is adaptable to use with 3/8" compression or 1/2" compression fittings
• Installation kit is included
• No Faucet Included
• Quick-Connect fittings on inlet and outlet ports
• 50 GPD thin film membrane
• Clog free brine flow control
Watts "Quick-Twist" reverse osmosis systems are highly effective because they provide four-step water treatment:
• Stage #1 - PRE-FILTER - Water is filtered with a five micron depth filter to remove particulates, sand, silt, rust particles and other solid matter
• Stage #2 - PRE-CARBON FILTER Water is filtered with an activated carbon block cartridge to protect the RO membrane by removing Chlorine
• Stage #3 - RO MEMBRANE Metals, salts & dissolved solids are rejected by the RO membrane during this step, so only high quality water is sent to the storage tank
• Stage #4 - POST-CARBON FILTER Water from the storage tank is treated with a polishing carbon filter to remove unpleasant tastes and foul odors
Feed Water Specifications
• Maximum Total Dissolved Solids: (TDS) 1,800 ppm
• Iron ( Maximum ): 0.2 ppm
• Hardness (less than): 10 gpg
• Hydrogen Sulfide: 0.0 ppm
• Manganese (less than) :0.05 ppm
• Turbidity (less than): 1 NTU
• pH Level / Range: 3-11
• Minimum Pressure: 40 psi (2.8 bar) -- ( Recommend Booster Pump if incoming pressure is below 40 psi )
• Maximum Pressure: 100 psi (7 bar)
QT Replacement Filters for 50 GPD System ( 10-Inch Replacement Filters )
• WQTSC-10 ( Stage One ) - Sediment
• WQTCBC-10 ( Stage Two ) - Carbon
• WQTCM50-10 ( Stage Three) - Membrane
• WQTCGAC-10 ( Stage Four) - Post Carbon
Featured | No |
---|---|
Brand | Watts Water |
Featured Product | No |
Related Products
Check items to add to the cart or
We found other products you might like!
View More Watts Water Products